Once the glue is ready, make sure your walls are dry and clean.
Measure the width of your roll and transfer it to the wall using the laser level. Apply the paste evenly to this section of the wall using the paste brush. Apply your roller along the line. Hang the wallpaper from top to bottom.
To remove air bubbles and fix the wallpaper securely, smooth the surface.
Work from top to bottom and from the center outwards. Use a smoothing tool for this step.
Cut off the excess wallpaper using a metal ruler and a cutter.
Clean off any traces of glue using the previously moistened sponge.

We recommend a standard paste for non-woven wallpapers.

A. Whether in flakes or powder, you will need to mix the glue with water according to the dosages indicated on the box. To obtain a homogeneous mixture, create a swirl in the center of the bucket and stir until the glue thickens.
Let stand for 10 minutes.


B. In liquid form, the glue is already ready to use.
We recommend applying the glue directly to the wall.
This makes it easier to hang the wallpaper.

. standard wallpaper glue
. a bucket
. a glue brush
. a large clean sponge
. a level (laser if possible)
. a cutter
. a maroufleur
. a roll of Little Cabari wallpaper

Custom-made decors are personalized panoramic wallpapers.
They are adapted to the dimensions of your wall.
We work the pattern in-house so that it fits perfectly into your interior.
The wallpaper is made up of strips numbered from 1 to 3, or more depending on the length of your decor.
Make sure to hang the strips in chronological order.
Safety margins of 5 to 10 cm are provided to avoid any unpleasant surprises.
They are provided at the bottom and to the right of the decorations. Therefore, it is essential to start the installation on the left and align the decoration to the top of the wall. It is therefore normal to have to cut a part of the design at the bottom and to the right of the decoration. This will not affect the design.